This article was originally published by Prepper Aaron at The Simple Prepper.
Having paracord handy when you need it during an emergency situation in the wilderness can literally be a lifesaver. This versatile material, which is the same thin nylon cord used for parachute lines, can tackle any application that would normally call for rope as well as a stand-in for nearly any use you can imagine during an emergency.
While you could carry loose paracord in your pack or survival kit, a better way to keep it easily accessible and somewhere you won’t lose it is to wrap a length of paracord around your wrist as a bracelet. This article will cover the basics of paracord and list seven of the best paracord weaves for making paracord bracelet designs.
Paracord is extremely durable and adaptable – characteristics that are critical for the tools that you might depend on in a survival situation. Some examples of uses that paracord is perfect for are:
Essentially, for any problem you might encounter, you can imagine – or someone already has tried – a way that paracord can help to solve the issue.
What to look for in paracord
The most important feature to look for in paracord is the strength of the nylon. Most premium paracord is 550-grade nylon, which is nearly unbreakable even under heavy use conditions. Although 400-grade paracord is also available, it is typically best to stick with 550-grade nylon since you’re planning to use this material in a survival situation and dependability matters.
Where to get paracord
Paracord bracelet supplies can easily be found online as well as in many outdoor and camping stores – its usefulness means that lots of places carry it. If you are planning on turning your loose paracord into a bracelet, you might also be interested in paracord bracelet kits that come complete with just enough paracord to make a bracelet as well as buckles to finish the bracelet design.
In addition, you can find buckles sold in bulk separately.
If you’re planning on making a lot of different paracord bracelet designs, you can also invest in a jig kit that will make the process go much more quickly.
Making paracord bracelets
When you are first starting out making paracord bracelets, the learning curve can be steep. Reading carefully through this and other guides and watching videos on the process can make the task go easier at first. In addition, be sure to buy an excessive amount of paracord for your first project, since it is highly possible that you will run into problems and wish you had more cord to work with. Also, remember that the finishing knot or buckle is one of the most important parts of the bracelet since it will determine how comfortable it is to wear and whether your weave will hold up over time. Be patient when making your first paracord bracelet, and the results will follow.
The first weave, the Dragon’s Teeth weave, is a wide paracord bracelet weave that is straightforward and perfect for beginners. It requires two different cords, typically of different colors for style.
To start, fold one of your cords in half to form a loop on one end, then push that loop through the buckle. The amount of loop extending through the buckle will ultimately be the length of your bracelet, which should be about half to one inch greater in diameter than your wrist. Then take the right side of the cord and bring it under and out of the loop, then push it upwards from under the buckle. Push the cord down through the resulting small loop and tighten it. Repeat the same maneuver on the left cord, then flip the bracelet 180° and bring the right cord down and then up through the loop. Bring the cord around and push it up from under the buckle and through the resulting small loop. Tighten it, and repeat on the left side to finish the buckle attachment.
The weave itself starts by pushing the second cord under-over-over-under the four strands of the first core. Then make a loop with the right strand of this cord in the middle and do the same for the left strand. Pull the strand under three of the first cord strands and over the last one, then back over the two middle strands and under the first one. Repeat this until you reach the point of finishing the bracelet.
To finish it off, take one outer strand from the second cord and wrap it twice around the first cord’s strands. Pull it down under the last two weaves and cinch the whole thing down, then cut the loose end and melt it with a lighter. Finally, cut the remaining end of the second strand and melt it with a lighter.
Step by Step Instructions (follow the link to Instructables)
Video Instructions Below:
The Fish Tail weave is clean-looking and stylish, as well as relatively easy with some practice. You’ll typically want about eight feet of a single cord of paracord for this weave.
To start it off on the buckle, fold the cord in half and push the loop through the buckle. Then pull the loop over the buckle. Before cinching down the hitch push the loose ends of the cord through the other side of the buckle and through the center of the hitch – then tighten it. Thread in the other buckle in the same way and fit it over your wrist to get an idea of how much cord you’ll need in between the two buckle halves to make it fit.
At this point, you’ll have two pieces of cord connecting the buckles in the center and two strands with ends coming out of the second buckle half on either side. Take the leftmost cord and pull it over the second and under the third strands. When you have that tight, weave the rightmost cord over the third strand and under the second strand. Repeat this process, making sure to keep the weave tight as you move along the bracelet.
Step by Step Instructions (follow the link to Instructables)
The Monster Cobra (or Tri-Color Solomon) weave is a little more involved since it uses three individual pieces of paracord rather than one or two, but it is still not difficult with practice and patience. Because of the three strands, the result will be a wide paracord bracelet compared to other weaves. Using different colors can help you keep track of your weave while you are learning.
To start attach two of the cords to your buckles by simply forming two hitches. For each cord, find the center and then loop it through the buckle, then pull that loop over the buckle and tighten it down.
To begin the weave, loop the third cord around the inner two strands (one from each of the first two cords). Pass the right strand of that cord and the rightmost strand of the first two cords under the leftmost strand and left strand of the third cord. Do the same for the left strand of the third cord and the leftmost strand of the first two cords, going over the rightmost strand. Repeat this crossover pattern down to the end of the bracelet.
To finish it, simply cut the loose ends of the strands after the last weave is tightened down and use a lighter to burn the cut ends of the paracord.
Step by Step Instructions (follow the link to Instructables)
The trilobite is a stylish weave that can be done in two colors since it uses two different cords. You’ll need a stable work area for this weave, though, since it requires hanging the cords off a nail or other hanger while working. The weave itself is an intricate braid and is not necessarily great for beginners.
To start, loop the two cords and hitch them through one half of the buckle as for many of the other paracord bracelet weaves. Once the buckle is fastened on, loop the two cords around the nail, the bottom one held out to the right and the top one held to the left. Then pass the rightmost strand over the two middle strands and under the leftmost strand, and pass the leftmost strand under the middle two strands and over the rightmost strand. For each of those strands you passed, loop them once around the leftmost and rightmost strands respectively. Repeat this weave until you reach the desired length.
When you are ready to close off the weave, you’ll have two loops at the top end where the cords were handing on the nail, and two strands coming off the bottom of the bracelet. Simply pull down on those two bottom strands, and the loops will tighten and disappear. Attach the other buckle via hitches to each of the strands, then cut and burn the remaining loose ends to finish the bracelet off.
Step by Step Instructions (follow the link to Instructables)
The boa is a wide paracord bracelet weave that can be difficult without a paracord jig. The weave uses two cords, so a two-color design is possible.
Start off by hitching both strands to one half of the buckle, but hitch them together rather than individually. When this is done, there should be two strands rather than four coming off of the buckle.
Cross the end of one strand over the top of both strands. Then cross the end of the other strand over top of that and under the two strands extending from the buckle, and loop it around the first end’s strand on the far side. Continue working with that end and loop it as you did the first, over the two center strands and under the strand on the opposite side. At the end of each weave, you will end with both ends of paracord on the same side of the bracelet. Repeat this pattern until you reach the desired bracelet length.
When you get to the end, hitch the four strands to the other half of the buckle as you normally would, by forming two loops. Because the hitches on either half of the buckle are different, expect the weave to look slightly different around the buckle. Cut the remaining cord and burn the ends to finish the bracelet.
Step by Step Instructions (follow the link to Instructables)
Rather than restrict your weaving to bracelets, you can also put your paracord supplies towards tactical paracord projects like wrapping the handle of an axe or other tool in paracord. This leaves you with much more continuous cord to work with when you break the weave in case of emergency.
Start at the top end of whatever handle you’ll be wrapping. To begin the wrap, simply find the middle of your cord (be sure to start with more cord than you think you’ll need – it’s easier to cut off later than to run out) and loop the middle around your starting point on the handle. Pull one strand up the handle and the other down the handle, then twist so that the strands are now looped around each other and are on opposite sides of the handle to how they started. Make another loop around the handle and repeat the process until you reach the bottom. Maintaining consistent tightness and keeping meticulous track of which strand is which is important for getting a consistent wrap during this weave, which will translate to comfort and ease of unraveling later. If you need to take a break, use a clamp to keep tension on the cord while you step away.
To finish off the wrap, a simple square knot will suffice. However, for added stability, if your handle has an eyehole near the bottom, you can push the cord through the hole and tie off against that. In either case, cut off the excess cord when you are finished and burn the ends to prevent the nylon from sloughing.
Step by Step Instructions (follow the link to Instructables)
Sometimes you just need to have a lot of paracord with you, and you want to be able to access it easily when the time comes – not deal with knots. To make matters more complicated, you don’t always know how much cord you’ll need for a specific application, so you need a system that can “dispense” cord without forcing you to redo your whole weave. This is where the storage weave comes in handy – it keeps your paracord nice and knot-free, but comes undone easily with a few tugs or can let out only as much cord as you would like before closing it off again.
Start off by making six loops in the paracord. The size of these loops will depend on how much cord you are trying to store, but wrapping the cord around your hand is a good guide of diameter. Once you have your loops, create a small loop at the point where your loops end and the excess cord begins. Wrap the excess cord around the six loops one time, then pull a small bit of the excess through the small loop you made and tighten it down to create a cinched-off loop.
Repeat this process, creating another small loop from your excess cord that is then pulled through your existing loop and cinched off. As you go, the loops will move around the circle and may eventually reach back to where you began, in which case you will just work on top of your original weave. At the end, your last loop will be left sticking out, ready to be pulled on to unravel the weave as much or as little as you need.
Step by Step Instructions (follow the link to Instructables)
Paracord is one of the most useful things you can carry into the backcountry in order to prepare for an emergency because it is so versatile and nearly unbreakable. But rather than pack loose paracord into your pack or emergency kit, winding it up into a bracelet that you can wear or a knot-free weave allows you to access your paracord quickly and easily when you need it. These 7 weaves are among the most useful ways to wrap your paracord so that you will always be ready to deal with an emergency.
It Took 22 Years to Get to This Point
This article was originally published by Michael Snyder at The Economic Collapse Blog. The fact...
This article was originally published by Michael Snyder at The Economic Collapse Blog. When one...
This article was originally published by John W. Whitehead and Nisha Whitehead at The Rutherford...
Commenting Policy:
Some comments on this web site are automatically moderated through our Spam protection systems. Please be patient if your comment isn’t immediately available. We’re not trying to censor you, the system just wants to make sure you’re not a robot posting random spam.
This website thrives because of its community. While we support lively debates and understand that people get excited, frustrated or angry at times, we ask that the conversation remain civil. Racism, to include any religious affiliation, will not be tolerated on this site, including the disparagement of people in the comments section.
made a macrame weave shotgun sling its not adjustable. couldve been nicer if it was adjustable and widened. my man knitting skills arent up to that level however i did make a functional sling that works well. id have no problem taking it apart to use the cord. if it was nicer dont think id want to.
http://www.survivalreadyblog.com/uploads/1/4/1/2/1412634/87588319-a-long-term-survival-guide-101-uses-for-paracord_1.pdf
101 uses for paracord, from surviv al blog a few years ago….a great site! and yes, DO buy only military paracord. i sell it at the gunshow here in hi desert so cal for 48$ for a full roll.
There are no comments on this, yet, but cordage and weaving are actually valid survival skills, which might equip you to make something from nothing.
Also, you don’t have to wait for teotwaki, for this to be useful.
I was at a gun show a couple years ago. There was a fella sellin old T-10 parachutes with the harness but it was detached from the chute. He wanted $35 bucks for the whole thing, so I bought one. The chute can be used in cold weather to keep very very warm and there’s a total of 600 feet of paracord that attaches the chute to the harness. Where else are you gonna get 600 feet of paracord for 35 bucks?
On this Independance Day weekend.
As you celebrate 4th of July.
As you listen to speeches about Liberty.
Item #1:
_ _ _ _ _
Watch this Video on YouTube:
“Utah nurse shares police video of ‘crazy’ arrest by Salt Lake officer”
_ _ _ _ _
This is the real Amerikka freedom. There is NO Freedom.
You are ruled, beaten, killed/ MURDERED, by heavy Handed TRIGGER Happy Tyrants in uniform.
You are ruled by politicians, judges, police, who are paid off by drug cartels. The politicians do not want a sealed border because they WANT Drugs and Terrorist to enter the country.
That is the real Amerikka. DEMAND A SECURE BORDER.
Item #2:
Trump is getting ready for a Major War.
War mongers profit while the young men die.
War is Not Patriotic.
PEACE is Patriotic. Nuclear weapons made war Obsolute. The consequences are too Great. Civilisation GONE.
As a ready citizen. Your first task should be the ability to think, reason, use logic, to evaluate situations-events-environment, ACCURATELY and Realisticly. Understand where you are. Understand who you are dealing with. Understand your environment. Good Judgment is priceless.
Amerrikka has lost her way. It is the responsibility of each of us to remedy that as best we can each day.
STAND. Push back against All Forms of Evil.
Just as our brave founding Fathers did. They were brave men.
DEMAND Accountability/Consequences when citizens are abused and MURDERED by those in uniform.
You are being INTENTIONALLY conditioned to be fearful. Instead be Brave and Resolved. Push Back. Demand Accountability.
Stop the Tech Monopoly Mafia Control Freaks.
STOP THE CENSORSHIP!
Bought a buncha olive drab paracord from Sportsmans Guide before Y2K. It’s mostly all cut up and used now. From staking tomato plants and pole beans, to tying sandbags and feed bags, to wrapping around the handle of a metal club, to hanging a deer carcass, it’s pretty useful stuff. But doubt I’ll be wearing bracelets anytime soon.
Possibly makes a handle, to carry a load.
The third worlders can move earth and heavy debris — eventually.
Paracord is something that comes in handy for many applications and will be priceless in shtf. Getcha some
prior comment censored?
If it ever shows up:
Utah Nurse man handled by bad cop.
Go to YouTube:
– – “Utah Cop Who Arrested Nurse Fired From 2nd Job!”
Here is second part. The Rest of the Story.
Be – – Aware -Alert -Awake -Ready
I started working with paracord years ago and made a hatband that goes with me everywhere. I was able to use 80ft of cord and wove into it 60′ of 7lb fishing line, 40′ jute twine, 25′ snare wire, an exacto blade, a ferro rod, 3 spinners, and 4 lead weights. You never know what you may need, or when you may need it, but this is so simple to carry I take for granted that its there, and living in the high desert you need a hat in every season.
The problem is finding real 550 cord. The majority of the stuff on the market is Chinese crap with the sheath very loose on the strands of the core. It does not have the requisite tensile strength. It will probably work for most uses anyway but I believe you should actually get what you think you are buying.
Learn to make string.
This is one of those simple things that most people can’t do, anymore.
back in the days i used it, it was type 3 nylon and was commonly referred to as 550 cord since the breaking strength was 550 lbs of pressure. Used it for everything. kinda like a P38, you never know what you need it for but it does the trick
You could make a belt to put around your waist with this same method, using a more substantial buckle. In fact, you could make a hat, a bag, a set of pot holders, a blanket/ pad for your sleeping bag, a vest,; the possibilities are endless.
.
.
Honeypot, I once saw a sleeping pad made out of these plastic grocery bags, it was pretty neat. Looked like a lot of work. Trekker Out
h ttps://www.youtube.com/watch?v=5JNe-hce0sY
Or a brooch… or a Pterodactyl…
I see tons of info on how 550 paracord is useful, but I see zero info on cutting these bracelets to free this paracord in the event of an emergency.
Either this is useful or it’s not. How ’bout it vendors? Is this useful in a real emergency????
My kids used to make these bracelets. When completed, the tag end is stuffed back under the weave and secured with a bit of glue. They come apart pretty easily.